Product Description
Item Description
Runoff Molecular Vacuum Pump
The radial molecular vacuum pump has a easy construction and adopts a flat disc rotor to defeat several drawbacks of the traditional molecular pump. It can improve the pumping pace by 50% with out escalating the rotating velocity.
Runoff Molecular Vacuum Pump
Our Benefits
Solution functionality qualities
1.No want for dry pump, minimal cost, substantial pumping velocity, clean and oil-free of charge vacuum can be attained, and the vacuum top quality can reach the influence of liquid nitrogen chilly lure+ dry pump.
two. It has dual capabilities of medium and substantial vacuum pumps, 1 for two, and can simplify the structure of the vacuum technique, preserving place and the price of the entire established of equipment.
3.High pumping velocity, higher vacuum pumping velocity 50% larger than molecular pump, medium vacuum pumping speed 3-fifty instances increased than roots pump.
four.Low power intake, only 1/2 of molecular pump, 1/5 of diffusion pump and 1/10 of roots pump
5.Tiny dimension and light-weight excess weight, only 2/3 of molecular pump, 1/4 of diffusion pump and 1/10 of roots pump
Normal Use
software location
—–Heavy ion accelerator
—–Solar mobile, LED, exhibit screen, tremendous capacitor, electrical power capacitor
—–Evaporation coating, optical coating, titanium gold coating, steady coating generation line, chemical vapor deposition
—–Unusual earth long lasting magnet content sintering, vacuum brazing, vacuum warmth treatment method, vacuum dehydroxylation
—–Molecular distillation, biopharmaceutical, CZPT drying
—–Vacuum maglev train
Item Parameters
specialized parameter
| project | Device | MB-150D | MB-200D | MB-250D | ML-200D | ML-250D |
| Air inlet / outlet | mm | ∅150/∅30 | ∅200/∅40 | ∅250/∅50 | ∅200/∅40 | ∅250/∅50 |
| velocity | rpm | 30,000 | 24,000 | 24,000 | 24,000 | 24,000 |
| Pumping pace | L/s | 450 | 1,000 | 1,five hundred | one,500 | two,200 |
| Greatest inlet force | Pa | a hundred | a hundred | one hundred | 50 | 50 |
| Ultimate pressure | Pa | ten-five | ten-five | 10-5 | 10-5 | 10-5 |
| Start off time | min | 3 | 6 | 6 | 6 | 6 |
| cooling h2o(25ºC) | L/m | 3 | 6 | six | six | 6 |
| power intake | kw | .2 | .3 | .five | .2 | .3 |
| fat | kg | 25 | forty two | 52 | 22 | 28 |
| Entrance stage pump | L/s | 4 | twenty five | 25 | 15 | 15 |
Comprehensive Photos
Runoff Molecular Vacuum Pump
Runoff Molecular Vacuum Pump
Common Supervisor Speech
Deeply cultivate the vacuum engineering, and investigation,build and manufacture the vacuum tools to offer the very best answer in the vacuum field and make the vacuum software easier.
Firm Profile
ZheJiang Kaien Vacuum Engineering Co., Ltd. is a high-tech company integrating R & D, creation and operation of vacuum equipment. The company has sturdy technical pressure, exceptional gear and thoughtful soon after-revenue support. The item production method is managed in rigorous accordance with IS09001 high quality technique. It mostly generates and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, h2o ring vacuum pump, vacuum device and other vacuum systems.
New plant plHangZhou
The company’s merchandise have been for a number of foodstuff, medicine, refrigeration, drying plants and a quantity of transformer associated gear makers for vacuum products. The goods are extensively used in vacuum drying and dehydration, kerosene vapor phase drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum concentration, oil and gas restoration, and so on.
High precision machining gear
The organization cooperates with a lot of scientific investigation institutions and universities, these kinds of as ZheJiang University, China University of petroleum, ZheJiang Institute of mechanical style, etc.with faculties and universities to study and create core technologies, and owns dozens of impartial mental house patents.Our technologies is major, the merchandise good quality is secure, the item has a very good popularity in China’s domestic industry, is offered all over the place, and is exported to Europe, The us, Africa, the Middle East and Southeast Asia,We adhering to the basic tenet of top quality, track record and provider, the business takes foremost-edge technology of vacuum pump as its very own accountability, and wholeheartedly serves clients of vacuum equipment application in numerous industries with rigorous operating perspective and professional operating design.
Solution quality wins buyer cooperationIn shipment ISO 9001 High tech organization certification
Welcome to send out your requirements, we will supply you with the greatest provider,
provide the finest assist!!!
|
US $3,000-10,000 / Piece | |
1 Piece (Min. Order) |
###
| Warranty: | One Year |
|---|---|
| Oil or Not: | Oil Free |
| Structure: | Screw |
| Exhauster Method: | Entrapment Vacuum Pump |
| Vacuum Degree: | High Vacuum |
| Work Function: | Mainsuction Pump |
###
| Customization: |
Available
|
|---|
###
| project | Unit | MB-150D | MB-200D | MB-250D | ML-200D | ML-250D |
| Air inlet / outlet | mm | ∅150/∅30 | ∅200/∅40 | ∅250/∅50 | ∅200/∅40 | ∅250/∅50 |
| speed | rpm | 30,000 | 24,000 | 24,000 | 24,000 | 24,000 |
| Pumping speed | L/s | 450 | 1,000 | 1,500 | 1,500 | 2,200 |
| Maximum inlet pressure | Pa | 100 | 100 | 100 | 50 | 50 |
| Ultimate pressure | Pa | 10-5 | 10-5 | 10-5 | 10-5 | 10-5 |
| Start time | min | 3 | 6 | 6 | 6 | 6 |
| cooling water(25ºC) | L/m | 3 | 6 | 6 | 6 | 6 |
| energy consumption | kw | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 |
| weight | kg | 25 | 42 | 52 | 22 | 28 |
| Front stage pump | L/s | 4 | 25 | 25 | 15 | 15 |
|
US $3,000-10,000 / Piece | |
1 Piece (Min. Order) |
###
| Warranty: | One Year |
|---|---|
| Oil or Not: | Oil Free |
| Structure: | Screw |
| Exhauster Method: | Entrapment Vacuum Pump |
| Vacuum Degree: | High Vacuum |
| Work Function: | Mainsuction Pump |
###
| Customization: |
Available
|
|---|
###
| project | Unit | MB-150D | MB-200D | MB-250D | ML-200D | ML-250D |
| Air inlet / outlet | mm | ∅150/∅30 | ∅200/∅40 | ∅250/∅50 | ∅200/∅40 | ∅250/∅50 |
| speed | rpm | 30,000 | 24,000 | 24,000 | 24,000 | 24,000 |
| Pumping speed | L/s | 450 | 1,000 | 1,500 | 1,500 | 2,200 |
| Maximum inlet pressure | Pa | 100 | 100 | 100 | 50 | 50 |
| Ultimate pressure | Pa | 10-5 | 10-5 | 10-5 | 10-5 | 10-5 |
| Start time | min | 3 | 6 | 6 | 6 | 6 |
| cooling water(25ºC) | L/m | 3 | 6 | 6 | 6 | 6 |
| energy consumption | kw | 0.2 | 0.3 | 0.5 | 0.2 | 0.3 |
| weight | kg | 25 | 42 | 52 | 22 | 28 |
| Front stage pump | L/s | 4 | 25 | 25 | 15 | 15 |
How to Assemble a Pulley System
A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
Simple pulley
The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the two wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The two pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to one end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use two or more wheels to transmit force. Compound pulleys have two or more wheels and can lift heavier objects. Dim is POLE2.
tapered pulley
It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across four steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley pulley system
A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the two wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope four times reduces the force required to lift one foot. Likewise, if the pulley system had four pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is three times the length of the rope, it will be more than three times the required length.
editor by czh 2022-11-26